See Now The Exhaust Back Pressure Sensor 7.3 Location!

Are you looking for the exhaust back pressure sensor 7.3 location? Well, it is located on the front side of the motor, connected by a tube. You will get to know how to find it in detail.

An exhaust back pressure or EBP sensor is essential to the Diesel Particulate Filter Regeneration Process. It measures the difference between exhaust passing through the filter before and after. The exhaust back pressure sensor is often cited as the exhaust gas pressure sensor or DPF sensor.

As you are here to know the location of the exhaust back pressure sensor in the 7.3 Powerstroke engine, we will provide you with the information. So without any further due, let’s dive into the topic!

So, What Is the Exhaust Back Pressure Sensor 7.3 Location

For regular Powerstroke maintenance or troubleshooting any issue, you may need to check the EBP sensor and its tube. So, to clean or replace the EBP sensor, first, you should know where is the exhaust pressure sensor located?

The EBP or exhaust back pressure sensor is located in the front part of the High-Pressure Oil Pump (HPOP) reservoir. It is attached to the firewall or engine on the foremost side of the HPOP.

So, here’s how you can find the 7.3 exhaust back pressure valve location to test or replace it easily.

How To Locate An Exhaust Back Pressure Sensor

First, open up your car’s hood or the engine cover to access the engine. You will see a rectangular-shaped black box with electrical connectors plugged into it on one side and the other side with the sensor. Two of the hoses made with rubber are also connected to the bottom.

However, the exhaust back pressure is normally bolted with your vehicle’s firewall or engine side. The firewall can be situated at the back or front side of the compartment.

International Exhaust Back Pressure Sensor Location

The international exhaust back pressure sensor location is also the same as described above. So in case you are looking for OM642 exhaust back pressure sensor location in Mercedes-Benz vehicles, you can find the OM642 EBP sensor (B60) same beside the firewall at the rear back of the engine.

On the other hand, if you ask for Maxxforce 7 exhaust back pressure sensor location, it is above the right valve cover and mounted above a bracket.

A Helpful Tutorial You May Need!

Frequently Asked Questions (FAQs)

Where is the exhaust back pressure sensor on 7.3 Powerstroke?

The EBP or exhaust back pressure sensor on 7.3 Powerstroke is located in the front of the High-Pressure Oil Pump (HPOP) reservoir. It is attached to the firewall or engine on the top side of the HPOP.

Can exhaust back pressure damage an engine?

Yes, a faulty exhaust back pressure sensor can have a negative impact on the engine and damage it. A faulty EBP sensor that is unable to differentiate the exhaust pressure may end up in an exhaust leak. And this can lead to acceleration and engine issues in your vehicle.

How do you check exhaust back pressure sensor?

The exhaust back pressure is typically bolted with your vehicle’s firewall or engine side. So, to check the EBP sensor, open up your car’s hood or the engine cover to get access to the engine. You will see a rectangular-shaped black box with electrical connectors plugged into it on one side and the other side with the sensor.

Final Words

So that was all about EBP or exhaust back pressure sensor 7.3 location. It is very easy to access the exhaust back pressure sensor as it is attached to the engine in almost every vehicle.

So, read the article carefully to locate the sensor valve. Still, if you struggle to access the EBP sensor, you can visit the nearest mechanical shop to find this out.

You Can Also Read: